Canvas Shoe Storage Bag: A Camper's Diy Guide

how to make a canvas shoe storage bag for camper

If you're looking to make a canvas shoe storage bag for your camper, you're in luck! There are plenty of options to choose from. You can purchase a ready-made canvas shoe storage bag from retailers such as Amazon, Camping World, or Luno. Alternatively, you can make your own by following online tutorials or getting creative with materials like PVC pipes, wooden dowels, or hanging wall planters. Whatever option you choose, having a designated place to store your shoes will help keep your camper tidy and organised.

Characteristics Values
Type Canvas shoe storage bag
Use Camper shoe storage
Number of pockets 10
Weight 1 pound
Colour Grey

shunauto

Hanging shoe organisers

If you want to make your own hanging shoe organiser, you will need the following materials:

  • 1 piece of fabric (3/4 yard for the back)
  • 4 pieces of fabric (1/4 yard each for the pockets)
  • Adhesive-backed hooks or door hooks
  • A dowel (7/16 inches is a good size)
  • A sewing machine and other sewing supplies

Cut your fabric to the following sizes:

  • Back: 27" x 36"
  • 4 strips for pockets: 9" x 36"
  • 2-4 strips for hooks: 3" x 9" (you will only need 2 if using door hooks)
  • Hem three sides of the back fabric, leaving one 27" side open. Fold over and press 1/4 inch, then fold over and press again. Stitch the hem in place.
  • For the remaining hem, fold over and press 1/4 inch, then fold over and press 1 inch. Stitch in place, leaving an opening for the dowel to be inserted.
  • To make the hook straps, fold the fabric in half lengthwise with right sides together and stitch. Turn it right side out, iron flat, and topstitch close to the edges. Repeat for all strips.
  • Sew the hook straps to the top of the back fabric, along the existing stitching.
  • Hem the long sides of the pocket fabric. Fold over and iron 1/4 inch on each short end.
  • Gather the pocket fabric by sewing along the bottom hem line, then sewing again 1/8 inch from the first stitches. Pull on one of the threads to gather the material, then place it on the backing and pin in place. Sew the pocket to the back along the sides and bottom.
  • Measure every six inches and mark it with a pin along the top and bottom. Stitch a vertical seam to form the pockets.
  • Repeat with the other pocket strips. Measure two inches down for the placement of the top pocket, and place the bottom pocket along the bottom. Eyeball the middle two pieces.
  • Insert the dowel into the top of the shoe rack and cut it to length.
  • Hang your organiser on the door or wall using adhesive-backed hooks or door hooks.

Now you have a functional and space-saving hanging shoe organiser for your camper!

shunauto

Using the space under the dinette

The space under the dinette is a great place to store shoes in an RV. There are a few different ways to utilise this space, depending on your setup and preferences.

One option is to use hanging canvas shoe racks, which can be hung horizontally on the side of the dinette or across the front. These racks typically have multiple pockets, providing storage for several pairs of shoes. They are designed to hang in closets or on doors, but work well in this space too. If you don't want to drill holes, you can use Command hooks to hang the shoe pockets. Be sure to get the wire hook option, as the thicker plastic hooks may be too large for the grommet holes.

Another idea is to convert the under-seat storage of the dinette into a shoe cubby. This requires some work, as you'll need to cut a hole in the back of the dinette and paint or laminate the edges for a finished look. Keep in mind the placement of seatbelts so you don't end up with straps over the opening. Installing a battery-powered push light underneath the seat will make it easier to see and access your shoes.

If you're handy with a sewing machine, you could also create a custom hanging storage compartment to fit the space under your dinette. Measure the area carefully and design a compartment that will make the most of the available space. Be sure to use high-quality canvas or fabric and include grommets or other hanging hardware.

Finally, if you're looking for a more unique solution, consider making a custom shoe box that doubles as a step up to the dinette. This is a great option if your dinette is difficult to access. The box will provide additional storage while also making it easier to get in and out of the seating area.

shunauto

Using the space under the bed

Buy or Make an Under-Bed Organiser

You can buy ready-made under-bed organisers, which are designed to slide under your bed and provide storage for your shoes. These often come with multiple compartments, allowing you to separate your shoes and providing a designated space for each pair. Alternatively, you could make your own under-bed organiser. You could sew your own hanging shoe rack, which can be hung around the corner of the bed, across the front, or down one side. You could even cut the canvas into sections to fit your space.

Use a Combination of Storage Solutions

Using a combination of storage solutions can be a great way to maximise the space under your bed. For example, you could use a mix of soft, hanging shoe organisers, small fabric totes, and plastic storage containers to store your shoes. This allows you to separate your shoes by type or frequency of use. For example, you could keep your most frequently worn shoes in the hanging organiser for easy access, while storing less frequently worn shoes in plastic containers to keep them out of the way.

Utilise Vertical Space

If you don't have a lot of floor space under your bed, consider utilising the vertical space instead. You can buy or make a hanging shoe rack that attaches to the side or end of your bed. This is a great way to keep your shoes off the floor and make use of often-overlooked space.

Store Shoes in Their Own Bags

Another way to use the space under your bed is to store each pair of shoes in its own bag. This helps to keep your shoes together and prevents them from getting scattered under the bed. It also makes it easier to retrieve your shoes when you need them, as you don't have to rummage through a pile of shoes.

Use Command Hooks

If you don't want to drill holes or damage the surface under your bed, consider using Command Hooks to hang your shoe organisers. Make sure to get the wire hook option, as the thicker plastic hooks may be too large for the grommet holes. Five heavy-duty 5-pound hooks should provide a secure setup, but if your shoes are on the lighter side, you may be able to get away with the 3-pound option.

shunauto

Using the space under the shower pan

The space under the shower pan can be used to create a custom shower pan solution. This is especially useful if you want to avoid a solid mortar shower base, which requires a sturdy, non-moving surface and adds unnecessary weight to your camper.

Step 1: Measure and Plan the Base and Drains

First, determine the placement of the shower and toilet drains, ensuring they are positioned to miss the intersection of floor joists running underneath the floor. Mark the drain holes with small pilot holes for reference. Plan for the toilet drain area to be high and flat, with the shower drain area being the lowest point, sloping towards the shower drain to prevent water pooling.

Step 2: Cut the Plywood Base

Using a paper template or the measurements from Step 1, cut out three layers of 1/2" plywood for the shower base using a circular saw. Label the layers to keep track of their order. Dry fit the layers in the shower to ensure they fit properly.

Step 3: Mark Up the Floor Layers

With the third layer on top, mark out the toilet drain area, ensuring it meets the minimum distance from the shower walls as per the toilet installation instructions. Then, use the shower drain piece to mark out the shape of the shower drain hole, measuring and marking two rings, each 6" apart, radiating out from the shower drain.

Step 4: Cut the Slope Rings

Using a jigsaw, cut out the outer 12" ring from the third layer. Move this layer onto the second layer and use it as a guide to mark and cut the inner 6" ring. Repeat this process for the first layer, ensuring that the shower drain hole is cut out with a spade bit and jigsaw.

Step 5: Cut the Shower Drain Hole

Cut out the shower drain hole in the first layer of plywood using a jigsaw. Dry fit the shower drain piece to ensure a snug fit. Use the newly cut shower drain hole as a guide to mark and cut the drain hole in the camper subfloor.

Step 6: Join the Layered Base Together

Glue and screw the three layers of plywood together, starting with layers 1 and 2, and then adding layer 3 on top. Ensure that the screws are drilled deep enough to be flush with or countersunk into the bottom of each layer for a flat surface. Let the adhesive cure overnight.

Step 7: Cut the Toilet Drain Hole

Dry fit the entire three-layer shower base in the shower and mark out the toilet drain, making the hole slightly bigger to accommodate the PVC coupler for plumbing to the black tank. Cut out the toilet drain hole in the wood base and the camper subfloor using a drill and jigsaw.

Step 8: Create the Slope

Using shims, layer and glue them together to create an even ramp between the high side of a lower layer and the low side of an upper layer, sloping down towards the shower drain. Ensure the entire floor slopes radially towards the shower drain, flowing around the toilet drain area.

Step 9: Glue the Slope

After dry-fitting the shims, glue them down with construction adhesive, being careful not to get glue on the shower drain piece.

Step 10: Fill the Slope (Optional)

Fill the gaps and nooks between the shims with gap filler spray insulating foam. Let the foam dry and harden overnight, then trim the excess with a jigsaw and smooth it out with a sander.

Step 11: Attach the Sloped Base to the Camper

Clean the vinyl floor and bottom of the shower base with paint thinner. Glue the shower base to the camper floor with Liquid Nails and drill wood screws through the bottom of the subfloor into the shower base for added security. Keep heavy weights on top of the base overnight while the adhesive dries.

Now you have a custom shower pan that makes efficient use of the space under the shower pan, maximizing your camper's storage potential!

shunauto

Using the space under the couch

The space under the couch is a great place to store your shoes in a camper. You can use the IKEA SKUBB shoe organizer, which is a hanging shoe organizer with pockets. This can be hung on the side of the couch or attached to the bottom of the couch with screws. This will keep your shoes organized and off the floor.

Another option is to use an over-the-door shoe organizer. These can be cut and mounted around the bottom of the couch. This will keep your shoes within reach and off the floor.

If you are handy with a sewing machine, you can also make your own hanging storage compartments to fit the space under your couch perfectly. This will ensure that your shoes are stored efficiently and safely.

Frequently asked questions

You can make a canvas shoe storage bag for a camper by purchasing a canvas shoe rack from a store like Camping World, or by making your own. If you want to make your own, you will need a canvas bag, a sewing machine, and some hooks or magnets to attach the bag to the wall of your camper. You can find canvas bags at most craft stores, and you can find hooks or magnets at any hardware store. Cut the canvas bag to the size you need, and then sew the edges together to create pockets for your shoes. Attach the hooks or magnets to the back of the bag, and then hang it on the wall of your camper.

You can buy a canvas shoe storage bag for a camper from a variety of retailers, including Camping World, Amazon, and IKEA. You can also find them at some specialty stores, like RV shops or camping stores.

Using a canvas shoe storage bag in a camper can help to keep your shoes organized and off the floor. It can also protect your shoes from getting dirty or wet, and it can provide a designated space for your shoes so that they are not scattered throughout your camper.

There are several alternative options for shoe storage in a camper, including hanging shoe organizers, custom shoe cabinets, PVC pipe shoe racks, or wedge-shaped holders such as hanging wall planters or magazine racks. You can also store your shoes in the compartments under your dinette seats, in the wheel well of your camper, or in the back seat of your truck.

To keep your shoes from getting dirty or wet in a camper, you can use a canvas shoe storage bag with a mesh bottom, which will allow your shoes to dry and air out. You can also keep a brush by the entrance of your camper to clean off dirty boots before entering, and you can store your shoes in a covered plastic bin to protect them from the elements.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment