Lubricating Camper Shell Windows For Easier Sliding

how to make camper shell window slide easier

If your camper shell window is stuck, there are a few things you can do to get it working smoothly again. First, check if the track is warped or blocked by debris. If so, use compressed air to blow out the track before lubricating it with a dry lube, teflon spray, or a silicone-based spray. You can also try marinating the window with a protectant like 303 Protectant to soften it before applying a silicone lubricant spray.

Characteristics Values
Lubricant type Dry lube
Lubricant type Silicone-based spray
Track preparation Blow the track out with compressed air
Track preparation Ensure the tracks are clear

shunauto

Use a dry lube

To make a camper shell window slide more easily, you can use a dry lube. This will help to reduce friction and wear in the tracks, making it easier to open and close the window.

Firstly, ensure the window tracks are clear and free from debris. You can do this by blowing the tracks out with compressed air. Then, apply the dry lube to the tracks. 3-IN-ONE RVcare Window & Track Dry Lube is a good option, as it is designed to reduce friction and wear, and it dries quickly, so it won't attract dirt and debris. It also provides long-lasting corrosion protection, which will help to prevent costly repairs and extend the life of your RV windows and doors.

When applying the dry lube, use the two-way Smart Straw to get either a wide spray or narrow stream, depending on the width of the window track. This will ensure easy and precise application without any messy overspray.

In addition to dry lube, you can also try a silicone-based spray or Teflon spray to lubricate the window tracks and make the window slide more smoothly.

shunauto

Use a silicone-based spray

If your camper shell window is stuck and won't slide, one solution is to use a silicone-based spray. Silicone spray is a type of lubricant that can help reduce friction and make the window slide more smoothly. Here's a step-by-step guide on how to use a silicone-based spray to make your camper shell window slide easier:

  • Before applying any lubricant, it's important to clean the window track and remove any dirt, debris, or old lubricant that may be built up. Use a clean, dry cloth to wipe down the track and ensure it is free of any obstructions.
  • Once the track is clean, you can apply the silicone-based spray. Shake the can well and hold it 6 to 12 inches away from the track. Spray a light, even coat of the silicone onto the entire length of the track.
  • After applying the silicone spray, use a dry cloth or paper towel to wipe down the track again. This will help to remove any excess lubricant and ensure an even coating.
  • Now, try sliding the window open and closed. You should notice that it moves more smoothly and with less resistance. If needed, you can apply a second coat of silicone spray for added lubrication.
  • It is recommended to regularly maintain your camper shell windows by cleaning and lubricating the tracks. This will help prevent the windows from becoming stuck and make them easier to operate over time.
  • Silicone spray is a versatile product and can be used on various window and door tracks, as well as hinges and other moving parts. It is important, however, to avoid using silicone spray on surfaces where you need a strong grip, such as pedals or footrests.
  • When working with any type of chemical or lubricant, it is important to prioritise your safety. Always wear protective gear, such as gloves and eye protection, and ensure the area is well-ventilated when applying the silicone spray.

By following these steps and using a silicone-based spray, you can make your camper shell window slide smoother and easier to operate. Regular maintenance and lubrication will help keep your windows in good working condition for years to come.

Camper Power: AC/DC Style

You may want to see also

shunauto

Clear out the tracks

To make a camper shell window slide more easily, it is important to clear out the tracks. This can be done by blowing the track out with compressed air. This will remove any dirt or debris that may be causing the window to stick. After blowing out the track, you can then apply a lubricant to make the window slide more smoothly.

It is recommended to use a dry lubricant, such as a silicone-based spray, to lubricate the tracks. You can also use Teflon spray or a silicone lubricant. These products will help to reduce friction and make the window easier to open and close.

Before applying the lubricant, it is important to ensure that the window is clean and free of any dirt or grease. You can use a mild soap and water solution to clean the window and tracks, and then dry them thoroughly before applying the lubricant.

In addition to clearing out the tracks and applying lubricant, it may also be helpful to inspect the tracks for any damage. If the tracks are warped or bent, they may need to be repaired or replaced. This can be done by contacting the manufacturer or a qualified technician for assistance.

By regularly clearing out the tracks, applying lubricant, and inspecting for any damage, you can help ensure that your camper shell window slides smoothly and is easy to operate.

shunauto

Use compressed air to blow the track out

If your camper shell window is stuck, it is recommended to blow the track out with some compressed air before you lubricate it. This is a good way to ensure that the track is clear of debris and dirt, which may be causing the window to stick.

To do this, you will need access to a compressed air source, such as an air compressor. Ensure that the air compressor is set to the correct pressure for your application. You will also need a blow gun attachment, which will allow you to direct the compressed air onto the track.

Attach the blow gun to the air compressor and direct the nozzle towards the track. Pull the trigger on the blow gun to release a burst of compressed air onto the track. Move the blow gun back and forth along the length of the track to ensure that all areas are cleaned.

Make sure to wear appropriate safety gear, including eye protection and gloves, when using compressed air. It is also important to ensure that you are in a well-ventilated area, as compressed air can generate high levels of noise.

Once you have blown out the track with compressed air, you can then apply a suitable lubricant to the track, such as a dry lube, Teflon spray, or silicone-based spray. This will help to ensure that the window slides smoothly and reduce the chance of sticking in the future.

The TAB Camper: Bathroom Included?

You may want to see also

shunauto

Repair or replace the guide/track

If your camper shell window is stuck and won't slide, the guide or track may need to be repaired or replaced. Here are some steps you can take to address this issue:

Inspect the Track and Guide:

Begin by inspecting the track and guide for any signs of damage or obstruction. Remove any debris, such as dirt, leaves, or twigs, that may be preventing the window from sliding smoothly. You can use compressed air to blow out the track and ensure it is clear.

Lubricate the Track:

Once the track is clear, apply a suitable lubricant to make the window slide more easily. A silicone-based spray is a good option for this purpose. You can also use a dry lubricant if you prefer. Make sure to follow the manufacturer's instructions for proper application.

Adjust the Guide or Track:

If the guide or track is slightly misaligned, you may be able to adjust it to ensure smooth sliding. This may involve loosening the screws that hold it in place, making the necessary adjustments, and then tightening the screws again. Be careful not to overtighten the screws, as this could strip the threads or damage the surrounding material.

Replace the Guide or Track:

If the guide or track is damaged beyond repair, you may need to replace it entirely. This will involve removing the old guide or track by unscrewing it and installing a new one. Make sure to purchase a replacement that is compatible with your specific camper shell model. You can find these parts at RV supply stores or online.

Maintain the Window Regularly:

To prevent future issues, it is important to maintain your camper shell window regularly. This includes keeping the track clear of debris and lubricating it periodically. Additionally, inspect the window seals and guides for any signs of wear and tear, replacing them if necessary.

By following these steps, you can repair or replace the guide/track of your camper shell window, making it slide more easily and ensuring a smoother camping experience.

Frequently asked questions

Use a dry lube, teflon spray, or a silicone-based spray. Make sure the tracks are clear and blow them out with compressed air before lubricating.

Try using a silicone-based spray and make sure the tracks are clear. You can also try to blow out the track with some compressed air.

You can try to repair or replace the guide/track. You can also try to soften the guide/track with a protectant like 303 Protectant and then spray with a silicone lubricant spray.

The guides on the top may have snapped off, which could be causing the issue.

You can try to reach out to the manufacturer for new ones or consider using rubber as a replacement.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment